Upcoming events
Ultrafast Laser Instrumentation
.Easy
Femto Easy products are designed to provide accurate and reliable measurements, whatever the experimental conditions. They can yield proper measurements without caring about the accuracy of the alignment.
Users feedback
Patrick Bowen MontagueR&D Manager - NKT Photonics - Denmark
Femto Easy’s FROGs are the most versatile tools available on the market. For our research purposes, the ability to cover broad bandwidth ranges with both fs and ps duration pulses made them ideal. The Femto Easy team also provides fast support and training on the equipment, which experienced FROG users will understand is crucial. The software produces accurate retrievals even in complex or low signal environments.
ASMLSenior Researcher - ASML - The Netherlands
With the Femto Easy FROG we went from unboxing to in-depth system learning in less than 1 hour. The system is intuitive to align and operate when compared to other similar systems in our facility.
Florent MargaillanOptical Engineer - NanoSciences Institute of Paris - France
The single-shot FROG is an ideal solution for characterization of kHz Ti:Sapphire amplifier with pulse duration of around 30 fs (achromatic design by using a bimirror). I particularly appreciated the consideration of my specific request on the wavelength range in order to characterize both the pump laser and the OPA signal. If the quality of the software is often highlighted, I also valued the overall finish of the device and its mechanical parts.
Beat JäggiActivity Manager Service - LASEA - Switzerland
We are using large area beam profilers for the alignment of the optical paths in our machines. The software is easy to use and very intuitive. The combination of the large sensor area with the relatively small footprint of the camera helps a lot for installing the camera in industrial machines where the space is limited. In addition to the cameras, we are also using the ROC autocorrelator. The device is easy to align and perfectly suited for temporary installation in a machine, due to its compact size. In case of problems and questions, the customer support of Femto Easy is reactive and provides good solutions.
Frederick BörgmannLaser Engineer - Edgewave - Germany
I am very happy with the Femto Easy FROG device. The ease of use and the software are absolutely great for fast lab work. I was especially successful in a project where our classic autocorrelator was performing badly due to saturation effects at low frequencies and I had no problems whatsoever using this device. My main use is compressor adjustment and the live measurement is great for that as well.
Martin MaurelResearcher - Teraxion - Canada
A few years ago, I had the privilege of testing the very first FROG prototype that Antoine delivered using his motorcycle at the time. Now, on a different continent, I regularly work with the FROG at 1030 nm. Being in an RD lab, the flexibility to move the measurement device without the inconvenience of extensive realignment is simply fantastic.
We use this equipment regularly, and the amplitude and phase reconstruction occur swiftly and with high precision. The single-shot feature has revolutionized our experiments by enabling us to actively and instantly cancel the residual spectral phase reconstructed by the algorithm, while simultaneously feeding our TPSR (tunable pulse stretcher) in real-time. The Femto Easy team is always there for us, ready to address our inquiries and provide assistance – something we truly appreciate.
Pierre DeslandesCTO, VP and Founder - Ilasis - France
The femtosecond pulse duration measurement solution from Femto Easy (ROC autocorrelator) is easy to use, fast and reliable. The STAR software also establishes a new standard in terms of user friendliness and ease of use.
Arnaud GuillossouSenior Laser & Optics Engineer - Bloom Lasers - France
We got the opportunity to try different models of BeamPro for our IR, green and UV lasers and all the cameras meet our specifications. Each camera has its own differentiation, from LP6.3 with its tiny pixels, to BP12.12 with its large sensor. The STAR software is easy to use, intuitive, and very responsive compared to other laser beam profiler suppliers
Nathalie VermeulenProfessor - Vrije Universiteit Brussel - Belgium
As a customer of Femto Easy, I really appreciate the wavelength flexibility of their FROG systems so that measurements can be performed in different wavelength domains using a single system. Special efforts were made to find the best solution for my needs and to optimize the system’s performance. The FROG software is very advanced and allows a detailed analysis of the measurement data. Finally, I also really value the fast response I receive from Femto Easy customer support in case of questions.
Valentin MaffeisLaser process R&D Engineer - HEF Groupe - France
Thanks to the ease of use of the single-shot ROC Autocorrelator and the BeamPro Laser Beam Profiler, our approach of beam characterization changed dramatically. Given the speed with which reliable results can be obtained and the robustness of the devices, we now use our two Femto Easy instruments for the monitoring of several machines. Technicians can be trained on those devices within an hour thanks to the comprehensive, but non-daunting, manuals. The STAR software is excellent on its own right, and the API makes it simple to integrate Femto Easy devices in our interface.
Karolis BalskusSenior Laser Engineer - Menhir Photonics - Switzerland
Menhir Photonics AG acquired a versatile Femto Easy multi-shot autocorrelator MS-ROC some time ago. This tool has been essential for accurate pulse duration measurements for multiple R&D projects. This version of the MS-ROC covers pulse durations from 50 fs to 40 ps. It is perfect for our high repetition rate, low pulse energy lasers.
Laurent GallaisProfessor - Institut Fresnel - France
We use the ROC single-shot autocorrelator and the BeamPro laser beam profiler from Femto Easy. Those systems are robust and easy to use, hence perfect for a laboratory use with multiple users.
Explore
A new standard in ultrafast laser measurement
Femto Easy is a company specialized in ultrafast metrology. We have a strong expertise in the production and characterization of high energy ultrashort pulses and we provide robust and reliable measurement devices for ultrafast lasers, already in use in several state of the art laboratories.
Our current product-line includes all the useful instruments to characterize and manage ultrafast lasers. We provide innovative devices for temporal measurement (ROC and FROG), spectral measurement (MISS spectrometer) and spatial measurement (BeamPro). They are suitable for a broad wavelength range (from UV to mid-IR) and a large pulse duration range, from 5 fs to 80 ps. Our latest addition to our range of products is an innovative and compact frequency converter for harmonic generation directly coupled to your ultrafast laser.
Beside their high-level technical performances, our products are very easy to use, compact, portable and versatile, which make them ideal tools for customer service.
The products are associated with a high quality user-friendly software which contributes to making them easy and pleasant to use. We also make custom products upon request and provide our expertise on ultrafast metrology.
Very easy to use
Our 2 major products can be installed in only 2 minutes without additional user-operated calibration routines. They come in an ultra-compact sizes and are suitable for both femtosecond and picosecond pulse characterization.
Accurate and alignment free
Every Femto Easy products are designed to provide accurate and reliable measurements, whatever the experimental conditions. They can yield proper measurements without caring about the accuracy of the alignment.
New standard in ultrafast laser measurements
We have a strong expertise in the production and characterization of high energy ultrashort pulses and we provide robust and reliable measurement devices for ultrafast lasers, already in use in several state of the art laboratories.
News
PLI 2024, June 18 – 19 2024
We will participate in the PLI Conference in our home town Bordeaux, from June 18th to 19th, 2024. Meet us there and discuss your ultrafast laser characterization applications.
SPIE Europe, April 9 – 10 2024
For the first time ever, we will participate in the SPIE Europe exhibition in Strasbourg, from April 9th to 10th, 2024. Meet us there and discuss your ultrafast laser characterization applications.
LWoP China, March 20 – 22 2024
For the first time ever, we will participate in the Laser World of Photonics China exhibition in Shanghai, from March 20th to 22nd, 2024. Meet us at booth #W3.3655 and discuss your ultrafast laser characterization applications.
4 reasons why Femto Easy systems are so easy to align and use
Embarking on the journey of ultrafast laser characterization? Uncover the simplicity and effectiveness behind Femto Easy autocorrelators and FROG systems, as we delve into four compelling reasons why aligning and utilizing these tools for your ultrafast laser characterization is a breeze
Photonics West, Jan 30 – Feb 1 2024
We will participate in the Photonics West exhibition in San Francisco, from January 30th to February 1st, 2024. Meet us at booth #5129D at the Moscone Center and discuss your ultrafast laser characterization applications.
PLI, Rennes, September 27 – 28 2023
We will be participating in the upcoming PLI conference in Rennes from September 27th to 28th. If you’re attending the event, be sure to stop by our booth to learn more about our ultrafast instrumentation
EPIC Meeting, Munich, June 28 2023
Our CEO Dr Antoine Dubrouil will give a talk about the ultrafast lasers characterization during the EPIC Meeting on Ultrafast Laser Processing, held during the Munich Laser World of Photonics trade-show, on June 28th 2023.
Laser World of Photonics, Munich, June 27 – 30 2023
We will be participating in the upcoming Laser World of Photonics trade show in Munich from June 27th to 30th. If you’re attending the event, be sure to stop by our booth to learn more about our ultrafast instrumentation
SPIE O+O, Prague, April 25 – 26 2023
We will be participating in the upcoming Optics + Optoelectronics conference organized by SPIE in Prague, Czech Republic on April 25th and 26th. If you’re attending the conference, be sure to stop by our booth to learn more about our ultrafast instrumentation
Ultrafast Optics UFOXIII, Bariloche, March 26 – 31 2023
We will participate in the UFOXIII conference, from March 26th to 31st, in Bariloche, Argentina. Meet us there and discuss your ultrafast laser characterization applications.
Femto Easy celebrates 7th anniversary
On January 10th, our team enjoyed a delightful evening together, kicking off with a collaborative and entertaining team-game before proceeding to a very good dinner at a fantastic restaurant. What a nice way to celebrate our 7th anniversary ! More than ever, we all are ready to start this new year and serve our customers in the […]
Photonics West 2023
We will participate in the Photonics West exhibition in San Francisco, from January 31st to February 2nd, 2023. Meet us at booth #959H at the Moscone Center and discuss your ultrafast laser characterization applications.
µ-ROC video
If you’re interested in cutting-edge technology, then you won’t want to miss our latest video showcasing the world’s most compact femtosecond autocorrelator. This innovative device is truly a marvel of modern engineering, and we’re excited to show you just how easy it is to use. In less than a minute, our video will take you […]
ATTO Conference 2022
We will participate in the ATTO conference, where we will introduce how our innovative instrumentation for ultrafast lasers can be applied to the Attoscience applications The ATTO conference will take place in Orlando, Florida, USA, from July 11-15, 2022.
SFO Annual Congress 2022
We will participate in the SFO Annual Congress, where we will introduce our innovative instrumentation for lasers characterization (autocorrelator, FROG, beam profiler) The SFO Annual Congress will take place in Nice, France, from July 04-08, 2022.
PLI, Laser Processing for Industry conference 2022
We will participate in the PLI conference, where we will introduce how our innovative instrumentation for ultrafast lasers can be applied to micromachining and other industrial applications The PLI conference will take place in Saint-Etienne, France, from June 28-29, 2022.
Laser World of Photonics 2022
We kindly invite you to Munich and are looking forward to your visit at our booth #B4/121-4 in hall B4. The world’s largest conference and exhibition for laser technology and photonics is back as a live event, serving as a showcase for Femto Easy’s masterpieces of laser and ultra-short pulse laser diagnostic solutions. Interesting insights […]
Femto Easy celebrates 6th anniversary and announces the appointment of their new ambassador for Germany
Femto Easy celebrates 6 years in business on February 10. The company has quickly earned the trust of laser experts around the world in science and industry. Founded by Antoine Dubrouil and Stéphane Lecorné, Femto Easy started in 2016 with the aim of creating unprecedented user-friendliness in ultrashort pulse measurement technology, which was still complex-to-operate […]
Photonics West 2022
We will exhibit at the Moscone Center, San Francisco, during the 2022 edition of Photonics West. Meet us on booth #1159H and discover our latest developments for ultrafast lasers metrology.
EOS Annual Meeting (EOSAM) 2021
The European Optical Society Annual Meeting Author and photo credit: The organizers from EOSAM The European Optical Society Annual Meeting, EOSAM, will be organized 13 – 17 September 2021.The conference will be held onsite in Rome, Italy. For those who cannot (or do not want to) attend in person, we will offer a hybrid option […]
Worlds smallest autocorrelator
Our new μ-ROC autocorrelator is available ! Not bigger than a golf ball, this is the smallest autocorrelator in the world !
Congress – Optique Dijon
OPTICS Dijon 2021: the largest international French-speaking congress From Monday, July 5 to Friday, July 9, 2021, Dijon will be the showcase for the flagship congress of the French Optical Society (SFO), which will highlight the richness and vigor of all sectors of optics in France. OPTIQUE Dijon 2021 will provide a global vision of […]
Antoine Dubrouil won Jean Jerphagnon Prize
Organized by IMT and Académie des technologies, the award objective is to promote technological innovation and the diffusion of optics and photonics in all fields of application. More information and a video presentation are available on LinkedIn. They speak about it : imt.fr, industrie-mag.com, academie-technologies.fr, industrie-techno.com, measurement-world.com
Spatial Chirp measurement video
In this video, we explore the concept of spatial chirp and how it can be measured using our single-shot FROG (Frequency-Resolved Optical Gating) system. Spatial chirp is a common a spatio-temporal distortion in which the color varies spatially across the beam. FROG systems in general are a powerful tool for measuring the temporal and spectral […]
FROG video
FROG stands for Frequency-resolved Optical Gating. It is a technique for a complete characterization of ultrashort pulses, thus it can retrieve the full time-dependant electric field, and the equivalent optical spectrum with spectral phase. In other words, FROG allow you to know the duration of your pulses, but also how to deal with spectral phase […]
ROC video
ROC stands for Row Optical Correlator. Based on an ultra compact and robust inline setup, the ROC allows the measurement of single-shot autocorrelation traces. Specifically designed to offer the easiest user experience, they cannot be misaligned and no calibration or tweaking is needed. Also, they are easily transportable. And yes, they are rock-solid! Besides those […]
English 
Chinese